Jl 250 1. JL2501楓葉天幕帳(鍛造釘款)會員價8,500元＠嘉隆RV休閒露營的窩｜PChome Online 個人新聞台 These JD amplifers now feature an LED clipping indicator which. Amplifier Power Ratings: At 14.4 volts: >80 dB S/N, 1% THD+N 4Ω: 150 watts RMS 3Ω: 200 watts RMS 2Ω: 250 watts RMS At 12.5 volts: >80 dB S/N, 1% THD+N 4Ω: 115 watts RMS 3Ω: 150 watts RMS 2Ω: 200 watts RMS Clipping LED: Using a 50 Hz sine-wave test tone recorded at 0 dB reference level (not included), the clipping LED helps you set the gain control to the maximum unclipped level.
FS 10" E30 Lukebox w/ Obcon, JL 250/1 amp and E36 C33 Radio from www.r3vlimited.com
See Appendix B (page 13) for details on "Input Voltage" settings. Monoblock Class A/B Amplifier: The JL Audio JX250/1 is a class A/B monoblock subwoofer amplifier that has been optimized for low-frequency (20-150 Hz) amplification of connected subwoofers.
FS 10" E30 Lukebox w/ Obcon, JL 250/1 amp and E36 C33 Radio
Monoblock Class D Subwoofer Amplifier, 250 W x 1 @ 2 Ω / 150 W x 1 @ 4 Ω - 14.4V Designed to produce a healthy 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system You get 250 watts of power at 2 ohms, 200 watts RMS at 3 ohms, and 150W RMS at 4 ohms Amplifier Power Ratings: At 14.4 volts: >80 dB S/N, 1% THD+N 4Ω: 150 watts RMS 3Ω: 200 watts RMS 2Ω: 250 watts RMS At 12.5 volts: >80 dB S/N, 1% THD+N 4Ω: 115 watts RMS 3Ω: 150 watts RMS 2Ω: 200 watts RMS Clipping LED: Using a 50 Hz sine-wave test tone recorded at 0 dB reference level (not included), the clipping LED helps you set the gain control to the maximum unclipped level.
FS 10" E30 Lukebox w/ Obcon, JL 250/1 amp and E36 C33 Radio. This means that the "Input Sens." rotary control will operate within that voltage window JL Audio JD500/1 • 250 watts x 1 channel @ 4 ohm • 500 watts x 1 channel @ 2 ohm • Total RMS Power: 500 watts • Class D 2 ohm Stable Monoblock Amplifier (9) $279.99
FS JL 250/1, JL 500/1, RF OEM 6x9 Speakers Nissan Titan Forum. Power Acoustik VA1-6000D • 600 watts x 1 channel @ 4 ohm • 1000 watts x 1 channel @ 2 ohm See Appendix B (page 13) for details on "Input Voltage" settings.